Quick Connect Couplings – AVST

Type AVST : Through type series couplings, Coupler & Adaptor both halves does not have valve mechanism. This one has a full flow straight through capacity because it is without valves. To disconnect pull the sleeve as well as the adaptor and to connect again pull the sleeve and push the adaptor.

Specification

Type: Straight-Through

Material: Brass, Stainless Steel, or Plastic

Application: Pneumatic, Water, Chemical

Temperature Range: 20°C to 100°C

Max Pressure: 1000 PSI (Brass/Stainless Steel)

Seal Type: Nitrile, Viton

Connection Type: Push-to-Connect

Size Range: 1/8″ to 1″

Other Types of Quick Connect Couplings

AVSV

AVDV

PRODUCT DESCRIPTION

PRECAUTION: Can not be connected / disconnected under pressure.

N M n l. SIZE	A	B	AL	AI	Hex.	Coupled Length	CL	CI	SO	TL	Wrk. Prss. PSI
1/4″	12	18	38	06	16	065	45	06	23	12	1500
3/8″	14	21	43	10	19	070	48	10	28	14	1500
1/2″	18	22	50	13	22	090	62	13	35	18	1000
3/4″	19	25	57	19	28	100	68	19	44	19	1000
1″	23	26	63	25	35	113	76	25	50	23	750
1¼”	25	38	80	32	41	127	85	32	68	25	750
1½”	26	42	85	38	50	138	95	38	75	26	750
2″	27	42	88	50	61	146	100	50	83	27	500
2½”	28	45	92	63	75	157	110	63	99	28	500
3″	30	50	100	76	98	185	135	76	119	30	500

PROPERTIES & PHYSICAL FEATURES

These couplings are manufactured in various metals with different end connections like Female / Male Threaded, Hose Shank, Flange End, Socket / Butt Weld End.

Quick Connect Couplings – Properties & Physical Features

N M n l. SIZE	HL	B	AL	AI	HI	Coupled Length	HL	SO	CL	HI	Wrk. Prss. PSI
1/4″	30	18	52	06	04	095	30	23	60	04	1500
3/8″	38	21	63	10	07	111	38	28	68	07	1500
1/2″	45	22	72	13	09	131	45	35	80	09	1000
3/4″	50	25	80	19	16	146	50	44	90	16	1000
1″	63	26	95	25	22	174	63	50	105	22	750
1¼”	70	38	115	32	28	207	70	68	130	28	750
1½”	75	42	124	38	32	220	75	75	138	32	750
2″	80	42	130	50	45	233	80	83	145	45	500
2½”	85	45	140	63	55	252	85	99	157	55	500
3″	100	50	160	76	68	280	100	119	170	68	500

Each AVLOK Coupling manufactured goes through stringent quality control, right from the procurement of raw material upto final stage.

N M n l. SIZE	A	B	AL	AI	Coupled Length	CL	CI	SO	A	Wrk. Prss. PSI
1/4″	16	18	34	06	054	38	06	23	16	1500
3/8″	17	21	38	10	059	42	10	28	17	1500
1/2″	18	22	40	13	066	48	13	35	18	1000
3/4″	22	25	47	19	078	56	19	44	22	1000
1″	28	26	54	25	090	62	25	50	24	750
1¼”	30	38	68	32	102	72	32	68	25	750
1½”	31	42	73	38	109	78	38	75	26	750
2″	32	42	74	50	112	80	50	83	28	500
2½”	40	45	85	63	132	92	63	99	35	500
3″	42	50	92	76	145	103	76	119	38	500

QUALITY CONTROL

Each AVLOK Coupling manufactured goes through stringent quality control, right from the procurement of raw material upto final stage.

PRECAUTION :

Avoid connecting or disconnecting a coupling under pressure.
Residual pressure in a coupling may make it difficult to connect. In such a case do not strike the valve end to depressurize it.
Improper selection of seal rubber may cause leakage.
Dust or flaws in the seal may cause leakage.
Improper selection or improper use of the products can cause personal injury and property damage.

METALS OF ASSEMBLY

SEAL MATERIAL

BODY	BALLS	SPRINGS	VALVES
Brass	SS.304	SS.304	Brass
SS.304	SS.304	SS.304	SS.304
SS.316	SS.316	SS.316	SS.316
Carbon Steel	Carbon Steel	SS.	Carbon Steel

RUBBER	OPERATING TEMPERATURE	RECOMMENDED APPLICATION
NITRILE	-20°C TO + 90°C	OIL RESISTANT
NEOPRENE	-20°C TO + 100°C	FREON / OZONE RESISTANT
EPDM	-20°C TO + 120°C	STEAM RESISTANT
SILICON	-20°C TO + 180°C	DRY HEAT
VITON	-20°C TO + 220°C	HEAT AND / OR CHEMICAL
TEFLON	-40°C TO + 260°C	HIGH TEMPERATURE

FEATURES :

Operation: The sliding sleeve on the coupler is pulled back, the adaptor is inserted then the sleeve is pushed forward to make the connection. The seal is made by poppet valves in each component which close during the disconnection cycle.

Specification: The sliding sleeve on the coupler is pulled back, the adaptor is inserted then the sleeve is pushed forward to make the connection. The seal is made by poppet valves in each component which close during the disconnection cycle.

Thread of Couplings: The sliding sleeve on the coupler is pulled back, the adaptor is inserted then the sleeve is pushed forward to make the connection. The seal is made by poppet valves in each component which close during the disconnection cycle.

AT A GLANCE:

AVI has been the confident supplier of Camlock and Quick connect couplings to various industries. AVI Quick connect couplings are standard for use on various Hose application which needs frequent takedown and service. This advantage plus proven reliability make AVLOK Quick Connect Couplings THE MARKET LEADER.

R & D has always been and continues to be an important activity of AVLOK. Many other developments and product variations result in the most complete line of House connections for the largest variety of fluids and applications offered by any other manufacturer.

Enquiry

If you have any query related to this product please contact us at +912222821251 or reach to us through email at info@avlok.com. Our experts would guide you the same and inform regarding other various metals suitable for your applications.

Quick Connect Couplings – AVST of Packing & Shipping Information

Available Payment Terms: LC (Letter of Credit), TT (Telegraphic Transfer or Wire Transfer), Cheque, and others.

Packaging: Quick Connect Couplings – AVST are packed with caution and safety so they reach our client’s as good as they would expect. Packaging Charges Extra.

Departing Port: Kalamboli, Bhiwandi or Mumbai port of Maharashtra state in India.

Tax: 18% GST